Typical Example

Model: R11-40

Swivelpole™ R11

Reuse existing pole top

Downloads

Applications

  • To convert an existing non lowering light pole to a Swivelpole™

Features & Benefits

  • Safe and easy installation without the need for hot work permits
  • Self-fastening design allows for easy positioning of the swivel joint
    to avoid obstructions when lowering

Standard Installed Heights

  • Maximum 3000mm

Installation/Mounting

  • Reuse existing pole base and top section

Accessories

Technical Specifications

Standard Material & Finish

Material:
  • Structural Steel
Finish:
  • Hot-dip Galvanised (HG)

Optional Material & Finish

Materials:
For superior corrosion resistance in marine or high corrosive environments:
  • Stainless Steel (SS) grade 316
  • Aluminium (AL)
Finishes:
  • Other commercially available finishes eg, powder coating can be supplied to suit specific applications and specifications

Manufacturing Standards

Steel:
AS 4100
Pipe:
AS 1163, Grade 250
Plate:
AS/NZS 3678-250
Welding:
AS 1554.1 SP
Hot-dip Galvanising:
AS/NZS 4680

Certification & Classification (HG)

Certified Standards:
  • AS 1657
  • AS/NZ 1170.0
  • AS/NZ 1170.1
  • AS/NZ 1170.2
  • AS 4100

Design Wind Loads1

Wind Speed:
291km/h (81m/s)

Maximum Light Fixture Weight

Recommended:
15kg
Notes
1.

Local meteorological data should always be considered.

Disclaimer

The adequacy of the guardrail and supporting structure must be verified by a site approved engineer. Swivelpole™ Australia will accept no responsibility for failure due to inadequacy of the supporting structure or guardrail to which the Swivelpole™ is mounted.

Ordering Information

Installed Height Base Section: Suits existing pole size Top Section: Suits existing pole size Product Code
DN OD Length DN OD Length 'T' Option
DN - Nominal SizeOD - Outside DiameterAll dimensions are in millimetres
3000 max. 32 42.4 — 32 42.4 — — R11-32
3000 max. 40 48.3 — 40 48.3 — — R11-40
3000 max. 50 60.3 — 50 60.3 — — R11-50